For a drying tower with a diameter of 6.2 meters, determine how many acid distribution holes per square meter are required for the acid distributor.
Thread Content
For a drying tower with a diameter of 6.2 meters, it is advisable to determine how many acid distribution holes per square meter should be used in the acid distributor.
The acid distributor manufacturers will conduct specific calculations based on your requirements; approximately 42 per square meter； It’s not just 42 per m2; moreover, depending on the tower diameter distribution, the pore sizes in different areas may not be consistent.
The design values for the acid separation points are related to the amount of acid, the volume of gas, the type and height of the filler, as well as the structure of the acid separator; generally, there are around 40 such points
It depends on the type of acid distributor you are using; tubular acid distributors generally require 41 units per m2