HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Check Violations by Looking at Images (October 19, 2018, Issue 4 of October)

2018-10-19View Original

Thread Content

This post was last edited by “Hasty Passerby” on October 19, 2018, at 14:51. Image-based identification of violations (October 2018, Issue 4). Instructions: 1. At construction sites or production sites, there are many instances of rule violations, which are detrimental to stable and safe production. We hope that everyone can point out the problems shown in the images, so as to help them improve their work. Thank you for your participation and support! ! ! Photos of the construction site: Answers: 1. The grounding wire of the welding machine is damaged. 2. Employees’ protective clothing is not uniform. 3. Some people are wearing short-sleeved clothes. 4. The welding machine lacks protection. 5. Safety helmets are not properly fastened (in some cases). 6. There is too much clutter at the site
Reply #22018-10-19
There are no guardrails around the holes; safety helmets are not worn properly; the site is messy; people are wearing short sleeves
Reply #32018-10-19
1. Waste at the construction site was not cleared in a timely manner; 2. No protective measures or warning signs are in place for the holes ; 3. The on-site construction workers are not wearing protective equipment properly ; 4. Tools such as welding machines are not stored properly after use.
Reply #42018-10-19
1. The construction site is in disarray, with waste not being removed in a timely manner; 2. No protective measures or warning signs are in place for the holes ; 3. The on-site construction workers are not wearing protective equipment properly ; 4. Tools such as welding machines are not placed properly after use.
Reply #52018-10-19
1. There are employees in the distance who are not wearing safety helmets. 2. Work uniforms are not being worn; short-sleeved shirts are not allowed. 3. The holes present at the site lack covers; warning tapes can be used to address this issue. 4. Construction waste must be disposed of promptly. 5. Welding machines need to be placed properly after use
Reply #62018-10-19
1. The construction site is in a chaotic state. 2. There are no protective fences or warning signs around the holes on the site. 3. The construction workers are not wearing work uniforms. 4. The construction workers are not wearing their safety helmets properly. 5. There are no safety warnings or signs at the construction site. 6. The scaffolding has been erected incorrectly
Reply #72018-10-19
1. Work uniforms not worn. 2. Cables improperly connected; debris scattered around. 3. Manholes not covered or not secured with warning tapes
Reply #82018-10-19
The manhole cover is not in place; Flooring materials, tools, and waste are discarded carelessly ; Work uniforms and safety helmets are not worn properly ; There were no safety warnings at the site.....
Reply #92018-10-19
1. The site is messy and lacks safety exits. 2. The manhole covers are not in place, posing a risk of falls. 3. The area where welding is carried out is very messy. 4. The workers are wearing short sleeves and do not have proper protective equipment. 5. There are too many debris and materials on the site, which can lead to fires. 6. Fire extinguishers are not available in the area where work is done at night. 7. The pits have not been properly covered with solid materials. 8. There are no warning signs around the pits. 9. There are no safety supervisors at the construction site. 10. Soil is piled up everywhere. 11. The soil is not covered with mesh screens, resulting in dust pollution. 12. People on the left side walk near the pits, and the openings at the edges of these pits are not covered
Reply #102018-10-19
1. Tools are not in good order. 2. Clothing does not meet the requirements. 3. The chin strap of the safety helmet is not fastened. 4. The ground wire of the welding machine is damaged. 5. The pit is not enclosed. 6. There is no enclosure or cover beside the square box panel. 7. There are no warning signs in the construction area. 8. There are no boundaries to separate different areas. 9. The scaffold lacks diagonal bracing. 10. There are no safety supervisors present. 11. The excavated soil is not covered with a fine-mesh net as required. 12. The excavated soil is piled up in a disordered manner. 13. Materials on site are placed haphazardly. 14. Flammable materials are stored in a way that increases the risk of fire. 15. There are no fire-fighting equipment available

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.