What are the reasons for high compressor inlet temperature?
Thread Content
Could gas leakage in the piston rings cause this phenomenon?
Air leakage can cause changes in the pressure between stages; a high intake temperature may also be due to a high temperature of the medium or insufficient water flow in the inter-stage coolers
You mean secondary intake, right? 1) The cooling water pressure is low. 2) Exhaust valve failure. 3) High inlet temperature of cooling water. 4) The sediment in the waterway is too thick. 5) Scaling of the cooling water pipes. 6) Inaccurate meter reading 7) Clogged intercooler
The poster should provide more detailed information regarding the conditions of this issue, such as the type of compressor, as well as any changes in exhaust volume and pressure. When one parameter of the compressor changes, other parameters are also affected; only by taking this into account can faults be identified and resolved. Piston seal failure resulting in air leakage ； Air valve sticking, valve disc fracture ； The cylinder’s soft water cooling effect is poor ； High intake pressure; changes in pressure ratio are possible
If there is gas leakage in the piston rings, it’s not simply due to high temperatures.