The hydraulic coupling can’t be removed; please help to take a look!
Thread Content
The hydraulic coupling can’t be removed; please help to take a look!
Are there no drawing documents? You can take a look at the structure before taking it apart.
Check with the manufacturer; it’s likely there is some interference fit, and it shouldn’t be disassembled carelessly – the manufacturer needs to guide the disassembly process
Check with the manufacturer; it’s likely there is some interference fit, and it shouldn’t be disassembled carelessly – the manufacturer needs to guide the disassembly process
It’s possible to separate this unit from the equipment; it can be sent back to the factory for repair. It separates at the connection point between the hydraulic coupler and the equipment. This looks like it’s connecting a coupling. Also, there are some single pieces of this hanging chain.
This is generally a tight fit; since the volume is relatively large, it is recommended to use specialized tools, such as an iron plate placed at the back of the coupler, and then use two or four jacks to push it out – heating can also be applied
Let professionals handle professional tasks; have after-sales maintenance staff provide on-site guidance for disassembly and assembly
The production unit can provide some guidance.
Make a tooling to push the shaft out using a hydraulic jack.