Schematic diagram of the six-way valve for the compressor lubricating oil cooler
Thread Content
Could any expert share the schematic diagram of the six-way valve for the compressor oil cooler? Thank you
This diagram is also very difficult to understand. Because the lines are too complex. It is sufficient to know how this valve functions at a certain opening position. Now, few people use this method anymore. When using it, make sure to make slight movements at the beginning; adjust according to pressure changes – if there is a slight drop in pressure, stop immediately. The idea is to allow the air in the filter cartridge to be gradually expelled, after which the pressure will return to normal and you can proceed with further operation. Before performing this operation, be sure to slightly open the exhaust valve on the filter cartridge to allow air to escape.