Issues with the compressor selection for this operating condition
Thread Content
Raw gas containing saturated water vapor, at a temperature of 210 degrees and a pressure of 3.9 MPa, is pressurized to 6.5 MPa using a centrifuge; what potential problems may arise with the use of a compressor under such conditions?
For steam compressors, as long as the right model is chosen, there should be no major issues; it mainly depends on the selection made
The medium is gas containing saturated water vapor
How many stages does the centrifuge have? It is recommended to consider that when saturated water vapor is pressurized to 6.5, water will condense; if the centrifuge contains water, the problem will become serious
What is the impact of high temperature of the compression medium on dry start sealing?