Issues with the oil level in the lubrication oil view window of the pump?
Thread Content
May I ask that the oil level in the sight glass of the pump’s lubricating oil should be between one-half and two-thirds of its capacity? Is this level requirement applicable when the equipment is running or when it is stopped?
For special cases, such as high-speed pumps, it needs to be adjusted to 1/2 after startup
Operation – the oil level needs to be checked during operation
I think what everyone is saying makes sense
The oil level must be maintained at normal levels both when the equipment is in operation and when the standby unit is in use!
Generally, the oil level is lower when the equipment is in operation compared to when it is at rest; therefore, it is necessary to ensure that the oil level remains at least at half during normal operation. If the oil level is too high, it’s easy for oil to spill