Vacuum pump evacuation rate
Thread Content
I would like to ask: if the motor does not have variable frequency control, how should one operate it in order to control the vacuum pumping speed of water ring vacuum pumps and rotary vane vacuum pumps?
The vacuum pumping rate can be adjusted by the opening degree of the inlet and outlet connection valves.
A balance line can be added between the exhaust and intake lines, with a control valve used to regulate flow there; this approach is more widely used than frequency conversion regulation
Control the rate through inlet and outlet valves
A nitrogen pipeline can be added to the buffer tank at the vacuum pump inlet or to the equipment that requires vacuuming; a control valve is used to regulate the amount of nitrogen supplied, thereby controlling the pumping rate by adjusting the vacuum level
A tee is installed on the vacuum pump suction line, and a control valve is placed on the branch line to regulate the vacuum rate. The branch can be connected to the exhaust pipeline or to the atmosphere (depending on the gas composition being evacuated).
Two options are available: the inlet vent valve and the switch inlet valve.