Compressor lubricating oil supply main pipe
Thread Content
Why is the main lubricating oil supply pipe for the compressor inclined?
What was said above is incorrect; it should be the return oil main pipe
To ensure smooth oil return, the construction specifications have relevant requirements
This return oil pipe not only serves to return oil but also facilitates the circulation of oil vapor from within the bearing housing to the oil tank and then to the atmosphere. Therefore, during installation, it is necessary to consider balancing the space occupied by each component at a certain cross-section of the return oil main. For reference.
As required by the regulations, the return oil main must have a slope to ensure smooth oil return.
It’s obviously from our company’s products; there will be smooth operation and gravity-assisted oil return
Oil return relies on gravity{:3_53:}