The window is too small
Thread Content
Hello heroes, the lubricating oil window is too small, and it is almost impossible to see where the oil level is. Think about it, is there any good solution? :call:
Hello! For this situation, we have a few suggestions to try. 1. Adjust the light: It may be easier to observe the oil level in the oil sight window in a well-lit environment. You can try to get enough sunlight or use a flashlight to shine through the window to observe. 2. Use a mirror: Use a small mirror to reflect the oil in the sight window to make it easier to see where the oil level is. Place the mirror near the viewing window and adjust it to a suitable angle to see the reflected lubricant state. 3. Install the oil level sensor: If it is really impossible to observe the oil level through the window, you can consider installing an oil level sensor to check the status of the lubricating oil through the display on the instrument panel. -
You can consider modifying an L-shaped oil sight window, as long as the connecting threads are consistent with the original specifications. Or the oil sight window can be expanded, but this requires special equipment and the iron filings need to be cleaned after the expansion.
Purchase several three-in-one reducer oil cups on Taobao, and pay attention to the consistency of the window thread specifications and the oil cup specifications, or arrange for a machine repairman to remove the window glass and weld the reducer oil cup and sight glass of the wrong thread specifications purchased together.