Water ring vacuum pump
Thread Content
This post was last edited by Qingchun Shanguang on 2023-6-3 at 06:40. Have you noticed that inside the right-hand separator tank, there seems to be a partition in the middle? The valve in the middle of the tank controls the drainage.
The right side is the pump inlet, the gas intake buffer tank – it’s important to ensure that what enters is in gaseous form. The left side is the gas-liquid separation tank; the gaseous phase is vented away, while the liquid phase, which is the working fluid, is recycled. It’s necessary to control the liquid level in order to ensure the proper operation of the water ring
The one on the right is a buffer tank before the pump. Purpose: To retain excess liquid material inside the tank, the drain valve at the bottom can be used to discharge the liquid material periodically. Structure: It’s just an empty can. In the valve section of the diagram, a level column or magnetic flap level gauge is generally used to monitor the liquid level. I hope this can clarify your doubts.