How to fill out records for welding operations and weld appearance inspection correctly
Thread Content
This post was last edited by bdwt on 2017-1-12 at 11:09. Regarding the parameters related to welding recorded in the welding and weld appearance inspection reports, such as welding current, arc voltage, welding speed, etc., should fixed values be used or range values? Please share your opinions.
Record the specific values of each parameter at a certain time, and then record the values of those parameters at various points during the process.
As I understand it, since it is a welding record, the actual welding parameters should be recorded, not a range; the range is specified by the welding process.
Start from reality – enter the welding current and voltage values as you measured them. The welder may adjust these values due to environmental factors, but that has nothing to do with the records you enter