On the topic of \"Compilation of Welding Standards (Volumes on Processes, Quality, Safety, and Testing Methods)\\"
Thread Content
On the topic of \"Compilation of Welding Standards (Volumes on Processes, Quality Safety, and Testing Methods)\": Book title: Compilation of Welding Standards (Volumes on Processes, Quality Safety, and Testing Methods). Author: Fifth Editing Department of China Quality Inspection Publishing House. Publishers: China Quality Inspection Publishing House, China Standard Publishing House. Publication date: November 2011. Introduction: To meet the needs of enterprises and institutions in industries such as mechanical engineering, shipbuilding, construction, aerospace, and petrochemicals, China Quality Inspection Publishing House and China Standard Publishing House have compiled the \"Compilation of Welding Standards\", which is divided into two volumes: the Materials Volume and the Volumes on Processes, Quality Safety, and Testing Methods. This volume is part of the \"Compilation of Welding Standards (Processes, Quality, Safety, and Testing Methods Volume)\". This volume compiles the welding processes and quality and safety standards that were approved and issued by the end of June 2011, including standards for welding processes, welding quality and safety, as well as test method standards – a total of **48 standards. The author has compiled the table of contents of the \"Compilation of Welding Standards (Volumes on Processes, Quality, Safety, and Testing Methods)\\" and attached it here for the benefit of all readers
Table of Contents of “Compilation of Welding Standards (Volumes on Processes, Quality, Safety, and Testing Methods)”
I. Welding Processes
GB/T 985.1-2008 Recommended grooves for gas welding, shielded metal arc welding, gas-tungsten arc welding, and high-energy beam welding
GB/T 985.2-2008 Recommended grooves for submerged arc welding
GB/T 985.3-2008 Recommended grooves for gas-tungsten arc welding of aluminum and aluminum alloys
GB/T 985.4-2008 Recommended grooves for composite steels
GB/T 5185-2005 Codes for welding and related process methods
GB/T 15169-2003 Skill assessment for steel fusion welders
GB/T 15829-2008 Soft fluxes – Classification and performance requirements
GB/T 16672-1996 Welds – Definitions of working positions, inclination angles, and rotation angles
GB/T 18591-2001 Guidelines for measuring welding preheating temperatures, interpass temperatures, and preheating maintenance temperatures
GB/T 19419-2003 Welding management – Tasks and responsibilities
GB/T 19804-2005 General dimensional tolerances and form and position tolerances for welded structures
GB/T 19805-2005 Skill assessment for welders
GB/T 19866-2005 General principles for welding procedure development and evaluation
GB/T 19867.1-2005 Welding procedure specifications for arc welding
GB/T 19867.2-2008 Welding procedure specifications for gas welding
GB/T 19867.3-2008 Welding procedure specifications for electron beam welding
GB/T 19867.4-2008 Welding procedure specifications for laser welding
GB/T 19867.5-2008 Welding procedure specifications for resistance welding
GB/T 19868.1-2005 Process qualification based on test welding materials
GB/T 19868.2-2005 Process qualification based on welding experience
GB/T 19868.3-2005 Process qualification based on standard welding procedures
GB/T 19868.4-2005 Process qualification based on pre-production welding tests
GB/T 19869.1-2005 Welding process qualification tests for steel, nickel, and nickel alloys
GB/T 19869.2-2012 Welding process qualification tests for aluminum and aluminum alloys
GB/T 22086-2008 Recommended processes for arc welding of aluminum and aluminum alloys
GB/T 25776-2010 Methods for evaluating the welding process properties of welding materials
I. Welding Processes
GB/T 985.1-2008 Recommended grooves for gas welding, shielded metal arc welding, gas-tungsten arc welding, and high-energy beam welding
GB/T 985.2-2008 Recommended grooves for submerged arc welding
GB/T 985.3-2008 Recommended grooves for gas-tungsten arc welding of aluminum and aluminum alloys
GB/T 985.4-2008 Recommended grooves for composite steels
GB/T 5185-2005 Codes for welding and related process methods
GB/T 15169-2003 Skill assessment for steel fusion welders
GB/T 15829-2008 Soft fluxes – Classification and performance requirements
GB/T 16672-1996 Welds – Definitions of working positions, inclination angles, and rotation angles
GB/T 18591-2001 Guidelines for measuring welding preheating temperatures, interpass temperatures, and preheating maintenance temperatures
GB/T 19419-2003 Welding management – Tasks and responsibilities
GB/T 19804-2005 General dimensional tolerances and form and position tolerances for welded structures
GB/T 19805-2005 Skill assessment for welders
GB/T 19866-2005 General principles for welding procedure development and evaluation
GB/T 19867.1-2005 Welding procedure specifications for arc welding
GB/T 19867.2-2008 Welding procedure specifications for gas welding
GB/T 19867.3-2008 Welding procedure specifications for electron beam welding
GB/T 19867.4-2008 Welding procedure specifications for laser welding
GB/T 19867.5-2008 Welding procedure specifications for resistance welding
GB/T 19868.1-2005 Process qualification based on test welding materials
GB/T 19868.2-2005 Process qualification based on welding experience
GB/T 19868.3-2005 Process qualification based on standard welding procedures
GB/T 19868.4-2005 Process qualification based on pre-production welding tests
GB/T 19869.1-2005 Welding process qualification tests for steel, nickel, and nickel alloys
GB/T 19869.2-2012 Welding process qualification tests for aluminum and aluminum alloys
GB/T 22086-2008 Recommended processes for arc welding of aluminum and aluminum alloys
GB/T 25776-2010 Methods for evaluating the welding process properties of welding materials
II. Welding Quality and Safety
GB/T 6417.1-2005 Classification and description of defects in metal fusion welded joints
GB/T 6417.2-2005 Classification and description of defects in metal pressure welded joints
GB/T 9448-1999 Safety in welding and cutting
GB/T 12467.1-2009 Requirements for the quality of metal fusion welding – Part 1: Criteria for selecting appropriate quality levels
GB/T 12467.2-2009 Requirements for the quality of metal fusion welding – Part 2: Comprehensive quality requirements
GB/T 12467.3-2009 Requirements for the quality of metal fusion welding – Part 3: General quality requirements
GB/T 12467.4-2009 Requirements for the quality of metal fusion welding – Part 4: Basic quality requirements
GB/T 12467.5-2009 Standard documents to be referred to for meeting quality requirements
GB/T 19418-2003 Guidelines for grading the quality of defects in arc welded joints of steel
GB/T 22085.1-2008 Guidelines for grading the quality of defects in electron beam and laser welded joints – Part 1: Steel
GB/T 22085.2-2008 Guidelines for grading the quality of defects in electron beam and laser welded joints – Part 2: Aluminum and aluminum alloys
GB/T 22087-2008 Guidelines for grading the quality of defects in arc welded joints of aluminum and aluminum alloys
III. Welding Test Methods
GB/T 1954-2008 Method for measuring the ferrite content in welds of chromium-nickel austenitic stainless steels
GB/T 2650-2008 Impact test method for welded joints
GB/T 2651-2008 Tensile test method for welded joints
GB/T 2652-2008 Tensile test method for welds and deposited metal
GB/T 2653-2008 Bend test method for welded joints
GB/T 2654-2008 Hardness test method for welded joints
GB/T 11363-2008 Strength test method for butt welded joints
GB/T 11364-2008 Wetting test method for welding filler metals
GB/T 25774.1-2010 Inspection of welding materials – Part 1: Preparation and inspection of mechanical property specimens for deposits of steel, nickel, and nickel alloys
GB/T 25774.2-2016 Inspection of welding materials – Part 2: Preparation and inspection of mechanical property specimens for single-pass welding joints of steel
GB/T 25774.3-2010 Inspection of welding materials – Part 3: Preparation and inspection of specimens for T-joint fillet welds
GB/T 25777-2010 Method for preparing chemical analysis specimens of deposits from welding materials
GB/T 6417.1-2005 Classification and description of defects in metal fusion welded joints
GB/T 6417.2-2005 Classification and description of defects in metal pressure welded joints
GB/T 9448-1999 Safety in welding and cutting
GB/T 12467.1-2009 Requirements for the quality of metal fusion welding – Part 1: Criteria for selecting appropriate quality levels
GB/T 12467.2-2009 Requirements for the quality of metal fusion welding – Part 2: Comprehensive quality requirements
GB/T 12467.3-2009 Requirements for the quality of metal fusion welding – Part 3: General quality requirements
GB/T 12467.4-2009 Requirements for the quality of metal fusion welding – Part 4: Basic quality requirements
GB/T 12467.5-2009 Standard documents to be referred to for meeting quality requirements
GB/T 19418-2003 Guidelines for grading the quality of defects in arc welded joints of steel
GB/T 22085.1-2008 Guidelines for grading the quality of defects in electron beam and laser welded joints – Part 1: Steel
GB/T 22085.2-2008 Guidelines for grading the quality of defects in electron beam and laser welded joints – Part 2: Aluminum and aluminum alloys
GB/T 22087-2008 Guidelines for grading the quality of defects in arc welded joints of aluminum and aluminum alloys
III. Welding Test Methods
GB/T 1954-2008 Method for measuring the ferrite content in welds of chromium-nickel austenitic stainless steels
GB/T 2650-2008 Impact test method for welded joints
GB/T 2651-2008 Tensile test method for welded joints
GB/T 2652-2008 Tensile test method for welds and deposited metal
GB/T 2653-2008 Bend test method for welded joints
GB/T 2654-2008 Hardness test method for welded joints
GB/T 11363-2008 Strength test method for butt welded joints
GB/T 11364-2008 Wetting test method for welding filler metals
GB/T 25774.1-2010 Inspection of welding materials – Part 1: Preparation and inspection of mechanical property specimens for deposits of steel, nickel, and nickel alloys
GB/T 25774.2-2016 Inspection of welding materials – Part 2: Preparation and inspection of mechanical property specimens for single-pass welding joints of steel
GB/T 25774.3-2010 Inspection of welding materials – Part 3: Preparation and inspection of specimens for T-joint fillet welds
GB/T 25777-2010 Method for preparing chemical analysis specimens of deposits from welding materials
Very comprehensive, thanks for sharing the materials.