I would appreciate it if the experts could give some advice. With the new equipment, during the filtration process using a microporous activated carbon filter, the activated carbon leaks into the material
Thread Content
With the new equipment, activated carbon leaks into the material during the filtration process using the microporous activated carbon filter. What could be the reasons for this issue, and what are the solutions? I would appreciate some advice from those with more experience!
It’s possible that the activated carbon has broken down due to aging after being used for too long. Filter again.
Check whether the filter screen or activated carbon is damaged.
1. Insufficient strength of the activated carbon particles； 2. The filter mesh has excessive gaps or is damaged ； 3. Frequent fluctuations in system pressure ； 4. Excessively high system pressure
1. Check the product quality to ensure that its structural strength meets the standards； 2. Whether the overall system pressure is within the design range or if there are significant fluctuations.