If standard saddle supports are used, is calculation still necessary?

2018-09-19View Original

Thread Content

1. If standard saddle supports are used, is calculation still necessary?

Reply #22018-09-19

As long as it is within the standard operating range of the saddle support, there is no need to perform calculations on the saddle.

Reply #32018-09-19

The position of the saddle under the container should comply with standards; it is recommended to choose a saddle with an appropriate wrap angle based on the container’s diameter.

Reply #42018-09-19

Refer to the provisions of NB/T 47042-2014.

Reply #52018-09-20

Choosing a saddle only ensures the reliability of the saddle itself; it is also necessary to check the stresses on the cylinder. It is recommended to use SW6 for such checks

Reply #62018-09-20

The NB/T47065-2018 version is already in use, but the calculations for SW6 still rely on the data from the old standard. Would it be appropriate for me to choose JB/T4712?

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Quick Links