3500-tank body, with a pressure of 0.30 Mpa inside, at room temperature
Thread Content
This post was last edited by chintwei on 2018-11-29 at 12:11. It involves a cylinder with a capacity of 3500 units; the pressure inside is 0.30 Mpa, and the temperature is room temperature. Using two angle irons to support the flat cover, can a thickness of 12 be achieved?
24mm, with 4 ribs horizontally and 4 ribs vertically
It is certainly unreasonable to rely solely on two angle steels for reinforcement with such a large diameter.
This post was last edited by chintwei on 2018-11-29 at 13:10. Do you have QQ? Let’s communicate
What about 0.15? Why is the calculation based on 304?
0.15MPa corresponds to 16mm; material is 304, with a total of 8 ribs