Why isn’t the weld inspection for the pipe shaft lugs specified in the lug design standards?
Thread Content
Is there verification for plate-type lug fillet welds, but no stress assessment for shaft-type lug welds? Who has the relevant verification? Waiting>>>>》, Also, can the shaft-type lugs overlap with the circumferential or longitudinal welds of the equipment? A friend told me that the pads for shaft-type lugs can overlap, but the shafts themselves cannot; the distance between them should be at least 5 times the thickness of the plate, or more than 100
The verification of the fillet weld between this gasket and the cylinder is carried out in accordance with WRC 107. There is a verification model in SW6.