Processing of large conical heads
Thread Content
As shown in the figure below, a cone needs to be manufactured, and the cutting dimensions are provided now. The wall thickness is 80. The customer only wants one weld – is that acceptable? How to achieve it?
The cost might be high. Steel plates of 3500X8600X80 are required, as well as a press large enough and a crane large enough. Let’s first look at the processing plants that have achieved this capability.
Find a processing factory to order directly or inquire about processing the material according to the desired dimensions.
Processing it isn’t difficult; most manufacturers have the capability to do so. The issue lies more with the steel plate – a steel plate of 3500X8600X80 dimensions definitely requires customization.
Steel plates that are 3500 wide generally require binding
It’s possible to do it, but the cost is too high. Custom steel plates and pressed end caps incur higher costs than those used in ordinary applications
Since welds are inevitable, what is the difference between one weld and multiple welds?