Valve pressure level and number of bolts
Thread Content
The company purchased a batch of cast iron valves, weighing 16 kg. The valves are equipped with 8 M20 bolts, and the matching flanges can only be 10 kg flanges. I would like to ask why the bolt holes on the valves do not match the flange kg? Is the valve not a standard part?
The kilograms are different! The appearance is different! There is a problem with the reporting plan!
There are 6kg, 10k, 16kg, 25, and 40kg valves. Be sure to check the manual. Some are the same and some are different.
Look at the valve product samples and the purchasing plan. What if there are requirements during purchasing?
Valve flanges of the same class should be matched with standard flanges. However, if it is a safety valve, the pressure levels and diameters of the inlet and outlet will generally be different. It is necessary to distinguish the inlet and outlet.
Only if the standard and pressure level are the same, use the software I compiled to check. https://bbs.hcbbs.com/thread-2955839-1-1.html
When purchasing, you should ask for the connection standard of the interface.
The original poster learned from the forum that you have consulted about bolted tanks before. Now that we have similar projects, can we add a WeChat account to discuss? My WeChat ID 13951316394
Valves and bearings are both standard parts