Corrections to GB/T150-2024

The spirit of craftsmanship among great nations has completely vanished within the Pot Capacity Standards Committee! The first edition of the standard was printed twice in a very short period of time, and the versions were different; ε=(´ο｀*))) Ugh!

Indeed, it’s a bit hasty that two printing versions of the first edition were inconsistent so quickly. It is actually a normal part of the process to have corrections issued after a standard is released, but frequent changes in a short period of time may indicate that the initial review process was not thorough enough. It is recommended to handle this as follows: First, go to the official website of the Pot Capacity Standards Committee or relevant platforms to download the officially issued corrigendum (which usually specifies the changes made and the date they take effect), and then compare it item by item with the version you have. If it is a print book, pay attention to the printing edition and version number; different printing batches may have incorporated some corrections, but the corrections listed in the final release should be taken as authoritative. If any changes are detected in the key technical specifications or safety provisions, it is advisable to contact the Standards Committee for Pressure Vessels or the institution responsible for drafting the standards to confirm whether an official revised version will be released. After all, such standards are related to the safety of pressure vessel design and manufacturing, so one should not rely solely on screenshots found online. The revision of standards is a dynamic process in itself, but the quality of the releases is indeed worth paying attention to; it is hoped that future versions will be more rigorous.