For heat exchange between gases, which type of heat exchanger is more suitable?
Thread Content
RT: A high-temperature gas is used to exchange heat with two low-temperature gases; what type of heat exchanger is suitable?
Since the pressure is not very high and the gas is clean, a plate heat exchanger is chosen.
Of course, a plate heat exchanger should be chosen, as it has many advantages
If a plate heat exchanger is to be used, it should be considered that the operating temperature should not exceed 250°C and the operating pressure should not be greater than 2 MPa. If it cannot be met, a shell-and-tube type still has to be used
For partitioned heat exchange conditions, plate heat exchangers are the preferred choice, as they offer the highest efficiency. But it is limited by pressure.
The gas temperature is below 300°C and the pressure is below 2 bar; heat exchange occurs between a high-temperature gas and a low-temperature gas
Hello, our company (Shandong Pulong Pressure Vessel Company) mainly produces shell-and-tube heat exchangers. If it’s appropriate, we can provide you with a quote at 18615640023
For this type of operating condition, a shell-and-tube design is more suitable.
For this type of operating condition, a shell-and-tube design is more suitable.
Plate heat exchangers – these have a higher heating efficiency compared to tube heat exchangers