quartz glass tube
Thread Content
That expert knows about DN20 quartz glass tubes, and what the best way is to connect the tubes together. The prerequisite is the ability to withstand high temperatures of 550°C and pressures of 0.1–0.2 MPa; if you have any good suggestions or methods, please pay attention
The joint part is made as a spherical flanged joint, which is fixed using metal clamps during connection. It can be done anywhere glasswork is done.
In accordance with standards HGS07-126~127, the glass tube flange sight glass adopts a clamped design, can withstand a pressure of 0.6 MPa, and quartz glass can tolerate temperatures above 550 degrees℃
Use sealant – sealant technology has now reached a highly advanced level; it’s nothing like the poor-quality versions of the past. Previously it wasn’t necessary because sealants were of poor quality; thus, mechanical mechanisms had to be used to seal non-metallic pipes. Now that better sealants are available, it’s sufficient to just use those – they can withstand high temperatures and pressures