Thread Content
The production process of stainless steel mesh belts involves several key steps, each of which is crucial. Below we will detail the manufacturing process for such belts: The material of the steel wires used in the mesh belt must be determined based on the operating conditions; different conditions require different materials for the wires. In cases where cooling is involved, it is sufficient for the stainless steel mesh belt to be made of standard stainless steel, with 201 or 301 being common choices. However, in situations requiring high-temperature resistance, materials such as 314 or 316 can be used. The specifications of the stainless steel mesh belt are determined according to the customer’s requirements; therefore, when ordering such a belt, it is necessary to specify various parameters including the pitch, wire diameter, thread pitch, and the diameter of the wires used. Finally, the length and width of each component of the mesh belt must also be indicated. Finally, confirm the total length of the stainless steel mesh belt. The steel wires used for the manufacturing of stainless steel mesh belt accessories need to be treated after they arrive at the factory. Loading onto the machine, wire winding and shaping using a stainless steel mesh belt. A section of the formed stainless steel mesh belt wire is cut according to the diagram provided for the stainless steel mesh belt, to ensure that each section has the desired width. After cutting a section from the stainless steel mesh belt that has been wound into shape, the wires of this section are woven together according to the customer’s requirements, thereby connecting all the sections of the wound stainless steel mesh belt together. Edge treatment of stainless steel mesh belts: Once the stainless steel mesh belts are formed by winding the wires together to create semi-finished products, it is necessary to treat the edges of these mesh belts. Appropriate methods for this purpose include welding, bending, screw welding, as well as adding chains, chain plates, and link pieces. Cleaning of stainless steel mesh belts: After dealing with welding issues on stainless steel mesh belts, and taking into account the weld points as well as the grease that appears during the winding process, it is appropriate to use a mild alkali or weak acid for cleaning in order to improve the surface brightness of these belts.