Thread Content
Pilz ML100-8-1000-RT/102/105 photoelectric sensor – Product description: Diffuse reflection type photoelectric sensor, plastic housing, adjustable detection range of 1000 mm, red light, on-light/off-light operation, NPN output, fixed cable. General specifications: Detection distance: 0 … 1000 mm; Adjustment range: 100 … 1000 mm; Reference object: Standard white plate, 100 mm x 100 mm; Light source: LED; Type of light source: Modulated visible red light; Polarization filter: None; Diameter of light spot: Approximately 75 mm at a distance of 1000 mm; Divergence angle: Approximately 2°; Optical orientation: Direct forward emission; Environmental light restrictions: EN 60947-5-2:2007+A1:2012. Functional safety-related parameters: MTTFd: 860 a; Task time (TM): 20 a; Diagnostic coverage (DC): 0%. Indicators/operating methods: Operating indicator: Green LED – indicates power supply is active; Function indicator: Yellow LED – lights up when the receiver detects light. Control elements: Sensitivity adjustment; On/off switch that activates when illuminated. Electrical technical specifications: Operating voltage: 10 … 30 V DC; Ripple: Maximum 10%; No-load current: < 20 mA. Output: Switch type – The switch type of this sensor can be changed. Default settings: The signal output is activated when the device is in the on state; it provides 1 NPN output. There is short-circuit protection and reverse polarity protection. The maximum switching voltage is 30 V DC, while the maximum switching current is 100 mA. The voltage drop across the impedance load is ≤ 1,5 V DC. The switching frequency is 1000 Hz, with a response time of 0,5 ms. Compliance: The product meets the standards EN 60947-5-2. Certifications and approvals: UL certification, cULus certification for Category 2 power supplies, or certified power supplies with a limited voltage output and a fuse (with a maximum current of 3.3 A, in compliance with UL248 standards). For enclosures of Category 1, CCC certification is required. When the rated voltage is ≤ 36 V, CCC certification/marking is not necessary. Environmental conditions: Operating temperature –30 ... 60 °C (-22 ... 140 °F); storage temperature –40 ... 70 °C (-40 ... 158 °F). Mechanical specifications: Enclosure width – 11 mm, enclosure height – 31 mm, enclosure depth – 20 mm. Protection rating: IP67. Connection: 2 m of fixed cable. Material: Enclosure – PC (polycarbonate); optical end face – PUMA. Weight: Approximately 50 g. Cable length: 2 m