On the topic of the \"Compilation of Selection Standards for Corrosion Prevention Design Engineers\"

Thread Content

On the topic of \"Compilation of Selection Standards for Corrosion Prevention Design Engineers\": Book title: Compilation of Selection Standards for Corrosion Prevention Design Engineers; Series title: Compilation of Selection Standards for Corrosion Prevention Engineers; Authors: Editorial Committee of the Compilation of Selection Standards for Corrosion Prevention Engineers, Fifth Editing Department, China Standard Press; Publisher: China Standard Press; Publication date: 9-1-2007; Introduction: The Chinese Society for Corrosion and Protection has compiled the \"Essential Reading Series for Corrosion Prevention Engineers.\" This series consists of three volumes: Compilation of Selection Standards for Corrosion Prevention Design Engineers, Compilation of Selection Standards for Corrosion Prevention Inspection Engineers, and Compilation of Selection Standards for Corrosion Prevention Construction Engineers. This volume is part of the \"Compilation of Selection Standards for Corrosion Protection Design Engineers.\" It contains 24 engineering standards in the field of corrosion protection that were approved and issued by the end of May 2007, of which 12 are national standards and 12 are industry standards. Relevant standards and magazines that were not included are listed in the appendix for easy reference. I. Since the publication of this “Compilation of Standards,” 10 standards have been revised and updated: GB/T 4054-2008 Paint Coating Marking (replacing GB 4054-1983); GB/T 13911-1992 Methods for Designating Metal Platings and Chemical Treatments (replacing GB/T 13911-1992); GB/T 16166-1996 Sacrificial Anode Cathodic Protection for Seawater Cooling Systems in Coastal Power Plants (replacing GB/T 16166-1996); GB/T 17731-2015 Magnesium Alloy Sacrificial Anodes (replacing GB/T 17731-2004); GB 50046-2008 Code for Corrosion Prevention Design of Industrial Buildings (replacing GB 50046-1995); GJB 2635A-2008 Requirements for Corrosion Protection Design and Control of Military Aircraft (replacing GJB 2635-1996); HG/T 20679-2014 Code for External Corrosion Prevention Design of Chemical Equipment and Pipelines (replacing HG/T 20679-1990); SY/T 0086-2012 Electrical Insulation Standards for Cathodically Protected Pipelines (replacing SY/T 0086-2003); SY/T 0088-2016 Technical Standards for Cathodic Protection of the Outer Wall at the Bottom of Steel Storage Tanks (replacing SY/T 0088-2006); SY/T 0096-2013 Technical Specifications for Forced-Current Deep-Anode Grounding Systems (replacing SY/T 0096-2000).

II. The table of contents of the “Compilation of Standards for Corrosion Prevention Design Engineers” is attached herewith for the benefit of all readers