Adjustment of the scraper for the bottom material scraping mechanism in tower-type granulation pots
Thread Content
What is an appropriate distance in centimeters between the scraper of the scraper conveyor in tower granulation and the bottom surface of the granulation tower?
In tower granulators, the distance between the scraper and the bottom of the tank should generally be adjusted to 2 to 3 millimeters to ensure effective scraping and prevent equipment damage. The specific distance still needs to be adjusted appropriately based on actual operating conditions. .
This post was last edited by 1025199692 on 2024-11-21 08:54. The gap between the scraper of a certain tower-type granulator and the bottom surface of the granulation tower is 35 mm
If the gap between the scraper and the bottom surface of the granulation tower is 35 mm, this excessive gap can lead to problems such as low efficiency and residual material. It is recommended to adjust the scraper gap to 2 to 3 millimeters to improve operational efficiency and reduce material waste. Precise adjustments need to be made according to the device model and the operation manual. .