Selection of feeding methods for reaction vessels
Thread Content
This post was last edited by Xiaoxue Yatou on 2017-11-9 at 16:47. A reaction vessel needs to be installed; the materials involved in the reaction include hazardous chemicals such as formaldehyde, styrene, methanol, diethylene glycol, and caustic soda. The potential harm of these substances to human health must be taken into consideration； What feeding methods can be used to reduce the harm caused by these hazardous chemicals to personnel? The reaction vessel operates at atmospheric pressure; the main process involved is heating, with the temperature remaining below 100 degrees throughout the entire process
Pumps are used for liquids, while feed hoppers are used for solids.
Feeding into a closed system. For example, powders are fed using pneumatic conveying
It is recommended to switch to a continuous device. Automatic control of feeding.
It is recommended to switch to a continuous device. Automatic control of feeding.
It is recommended to switch to a continuous device. Automatic control of feeding.
Liquids are pumped, while powders can be transported by vacuum or pneumatic means
Each material is pumped or forced into the reactor using gas.