Problems with the flow meter
Thread Content
Our factory is upgrading a section of pipeline and needs to install the flow meter from the high-pressure side at 30 KG to the low-pressure side at 4 KG. Will it be accurate? Please indicate the reason
At the very least, please provide the flow meter type, flow range, diameter, and the medium being measured: L
The displayed values must be converted
It is difficult to achieve accurate measurement when using it to convert high pressure to low pressure, or in applications with a large range but low flow rate
The parameters need to be set again.
It’s not necessarily true to say that: for example, in terms of quality and electromagnetic measurements, there is almost no difference between water. Changes in the measurement range do have an impact, but it depends on how significant those changes are. The electromagnetic range ratio reaches 1:100, which is very high!
Depending on the type of flow meter, it’s better to check its measurement range
Different types of flowmeters require different approaches. Your question is too general
First, it is necessary to know what type of flow meter it is in order to come up with a solution. .
No, it deviates from the process conditions of the original table
If it is an electromagnetic flowmeter and used for measuring water, there is no problem at all. If it is a gas flow meter, there could be serious problems. If it’s another liquid, it may be necessary to do some calculations.