Which differential pressure gauge should be used for liquids with a high amount of suspended solids?
Thread Content
When filtering liquids containing a large amount of suspended solids using a sand filter tank, there is concern that using a regular differential pressure gauge to measure the pressure difference in the tank may cause the gauge to fail quickly. Which type of differential pressure gauge can be used to solve the above problem?
This should be of the flange type and needs to be inserted; an anti-backwash device can be added if necessary
This post was last edited by 1111111 on 2017-12-5 at 11:54. Use the Shuaike zero-leakage pressure and gas sampling sensor diaphragm non-contact level gauge from my village. It can be used to measure mud, lime milk, slurry, and concrete cement mortar. Use this one — Liao_Zha_Lie
Friends, we just need an on-site gauge; no transmitter is required.:'
For this type of watch, a display screen is standard. . . Power must be supplied; otherwise, the sensors cannot function. . . If you don’t want remote signals, it’s simple: we just cut off the signals, and that’s it. Power supply is necessary. .
To be honest, using a differential pressure field instrument is quite expensive, and it requires double flanges. The cost is lower if a transmitter is used. Use a voltage transformer; double-flange or other types will work as well
Top-mounted magnetic flap – just 2,000 yuan.
Everyone, what the landlord wants to measure is the differential pressure, not the liquid level. I guess the original poster is asking about the method of connection; let’s see if using a capillary tube will work and whether it can meet the requirements https://www.wika.cn/990_29_zh_cn.WIKA?ProductGroup=73572