Selection of acetylene flow meter
Thread Content
The company operates on an independent accounting basis; it is a separate facility from the acetylene production plant. At present, orifice plate flow meters of DN700 size are being used, but the data obtained using them varies significantly. I would like to ask everyone what type of flow meter would be suitable for use in the PVC acetylene main pipeline What about hydrogen chloride? Thank you
The range ratio of orifice plates is narrow; an insert-type digital, seismic-resistant intelligent vortex flow meter will suffice, with an accuracy level of 1.5. The range ratio for this insert-type meter is 1:20, making it quite cost-effective. If you need assistance, please contact me at 18906316881------Digital seismic vortex flowmeters (with a seismic resistance of up to 2.0g). These devices use our company’s proprietary digital vortex flowmeters that operate on a 3.6V power supply, eliminating the need for a separate grounding system.
At first, Aniuoba was also chosen, but due to flow rate limitations the differential pressure value was too low, and the range ratio did not meet the requirements; therefore, a porous orifice plate, also known as a balanced orifice plate, was used instead. It’s not yet known what the actual performance will be once it is put into use, but at least the calculation documents look much better now.
Which type of equilibrium orifice plate have you chosen? Is it A+K?
Thank you, I’ll check with these companies