How to wire the agitator of Daqing Rishang JF-5?
Thread Content
As indicated in the title, during installation I accidentally pulled out the yellow and brown wires of the stirrer. The yellow wire was connected correctly, but the brown wire wasn’t; as a result, the stirrer does not work when in operation. I hope someone experienced in this can provide some guidance
I don’t understand what kind of device this is. Looking at the positions of the brown and yellow wires, it seems to be a variable resistor. If it is indeed a variable resistor, then it depends on the circuit diagram; its resistance value could range from a few thousand ohms to several hundred kiloohms. Since it was removed, and judging from the condition of its terminals, it appears to be connected by soldering, so there should definitely be some traces of that