Welding of instrument pressure lead pipes
Thread Content
I’m inquiring about the automatic welding of instrument pressure guide pipelines – is there such an automatic welding machine?
I don’t think so; generally, it’s determined by the way the pressure guiding pipes are laid, installed, and their location
I don’t think so; generally, it’s determined by the way the pressure guiding pipes are laid, installed, and their location
I don’t know; is there an appropriate automatic welding machine for welding the pressure tapping pipes of instruments? I just want to improve the welding quality and the level of mechanization.
Automatic welding is used for large pipes; for such small pipes, welding can be done manually – it only takes a few minutes per weld. In such cases, manual welding is actually more efficient than automatic welding
I’ve never used it; it’s all welded manually.
I found two companies online: Kunshan Anyiyuan Pipeline Technology Co., Ltd； Kunshan Huaheng Welding Technology Co., Ltd ； The main concern is whether, in current petrochemical plants, any construction contractors have used such small-diameter automatic welding machines Is the performance good when used on-site?
I’ve never used it; everything is welded manually on site
On-site automatic welding is not suitable for instrument pressure pipes, especially under high-temperature and high-pressure conditions; manual welding by skilled technicians ensures better quality.