Samson 4763 locator
Thread Content
This image is from the manual for the 4763 locator, but I don’t understand it. What does it mean? Thank you
What this graph shows is that as the knob pointer moves from 0 degrees to 360 degrees, the pressure exerted by the locator gradually decreases.
My understanding: three pressure curves, the relationship between angle and gain; in practice, the angle is adjusted based on the actual pressure and this diagram
The default value for XP is 3%. Adjust the angle according to the supply pressure so that XP is around 3%; the lower this value, the better. However, if XP is too low, it can cause fluctuations in the valve position after it has been adjusted to the correct position. Therefore, it is recommended to set it at 3%.
It’s too complicated; you can try the Aitam locator