ifix4.5 screen conversion issue
Thread Content
This post was last edited by Hardmen on 2010-6-30 22:38. The project was created using fixix4.5; at first, the screen transitions worked normally, but after running it for some time, the transitions became very slow, taking over ten seconds. What could be the reason? Please give some advice. Note: The screen switching is done using the replace command, so there is no issue with having multiple screens open.
Reply to 1# gxcyx: Is it because too many animations are being used in the visuals? It’s not recommended to use the system’s built-in image library; a small amount of its images can be used instead. Also, consider the amount of data that needs to be read. This is just my personal opinion; I’m still learning too
There are too many modules for dynamic data display; for some less important data, things like tag numbers can be displayed statically, with only the data being linked dynamically. If too much dynamic display is used, the system should alert you by showing a message box.
For fixx-related issues, you can turn to me; I have quite in-depth knowledge of both fixx and intouch
I need to test his situation first; I require him to provide me with the computer system processes when the screen opens slowly
There are probably several reasons: 1. The system contains a large amount of data. 2. The graphics make extensive use of bitmaps. 3. The program includes pages developed by third parties, which are not handled properly in the scripting process. 4. There is an issue with the computer system. 5. There are problems with the scripts, such as infinite loops and other errors. 6. The software used by the poster is pirated and has been wrapped in a shell, but the wrapping was done poorly. 7. – It is recommended that the poster apply the fixix4.5 patch first