Shifu Mei AquaXact1688 moisture sensor; Model: DMT143L; Model: AquaXact 1688

Thread Content

The AquXact 1688 dew point sensor, which allows for chip replacement without the need for calibration, features a durable, ultra-thin alumina membrane that enables moisture measurement in various gas-phase processes; no calibration is required after the sensor is replaced or dried. Applicable industries: glove boxes, air separation units, natural gas processing, transportation, and gases for instruments. The DMT143L features a wide measurement range and is designed for use in harsh environments, enabling stable measurements over long periods in conditions with low dew points. Applicable industries: compressed air dryers, plastic dryers, lithium batteries, and other OEM applications. Temperature ranges of -60~+60°C and -80~+20°C are available; accuracy is ±2°C, with a pressure resistance of 20 bara. It features automatic calibration and fast response time. Calibration is required every two years; an LED alarm indicates when the dew point exceeds the specified limits. Calibration is based on NIST standards. It can be connected remotely to the SERVOPPO MonnoExact DF310E multi-channel gas analysis system. Sensor chips can be easily replaced on-site. It is not affected by condensation or liquid water. The stainless steel weather-resistant enclosure (Class 1 Division 2) can withstand ambient temperatures from -10~+70°C. WeChat: guo19980405