Are thermoresistors affected by viscosity, crystallization, and solidification?
Thread Content
:Dizzy: Are thermal resistors affected by viscosity, crystallization, and solidification? To what extent are they susceptible to these effects, and what measures can be taken to avoid them?
It has an impact, mainly due to the heat transfer resistance.
Depending on the properties of the material and the locations where temperature measurements are taken in the equipment pipelines, it is possible to conduct gas-phase temperature measurements at the top of the material or liquid-phase temperature measurements at the bottom. For reference.
How can it solidify, crystallize? Is your material no longer flowing? If the material is prone to crystallization or solidification, such as asphalt or industrial naphthalene, it is necessary to ensure proper flow of the material; therefore, the temperature must be above the softening point, so as to prevent crystallization or solidification
There are temperature interfaces in both the gas phase and at the bottom; the device is equipped with sleeves