Gasification Daily Question 2018-11-27
Thread Content
The purpose of installing an LN purge after the safety valve of the carbon scrubber is ( ). The purpose of installing an LN purge system behind the safety valve of the carbon scrubber is to purge the gas in the syngas vent line, ensuring that there is always flow in the pipeline toward the flare.
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to ensure that flow continuously enters the flare
Blow off the gas in the syngas vent line to ensure that flow continuously enters the flare
The gas in the syngas vent line is blown out to ensure that flow continuously enters the flare
(Blow off the gas in the syngas vent line to ensure a continuous flow into the flare)
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare gas line.
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to ensure a continuous flow into the flare.