Gasification Daily Question 2018-12-29
Thread Content
The purpose of installing an LN purge system behind the safety valve of the carbon scrubber is ( ). Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow out the gas in the synthetic gas pipeline to allow flow within the pipeline to enter the flare
Yes (the gas in the syngas vent line is blown out to ensure a continuous flow into the flare), with flow control at ≥70 Nm3/h.
Drain the combustible gases from the vent line.
Blow off the gas in the syngas vent line to ensure that there is a continuous flow into the flare
Blow off the gas in the syngas vent line to maintain a flow in the pipeline, similar to that in a flare.
Reducing the gas flow rate facilitates the descent of dust particles; buffering the gas flow ensures even passage through the holes in the tray
(Blow off the gas in the syngas vent line to ensure a continuous flow into the flare)
Blow off the gas in the syngas vent line