Regarding the gasification furnace systems, what technical improvements have been made based on the original design, and what results have been achieved?
Thread Content
Regarding the gasification furnace systems, what technical improvements have been made based on the original design, and what results have been achieved?
Our company uses the Texaco full waste-heat recovery process; originally, the carbon scrubbing tower was washed using medium-pressure boiler feedwater, but it was later changed to shift condensate.
The Endu furnace includes a water seal on the outside of the bottom of the scrubber tower to address the issue of blockages at the bottom
The Ende furnace installs a U-shaped water seal in the outlet pipe of the wet electrostatic precipitator, which is also the system’s outlet pipe, in order to block the gas flow during shutdown for maintenance.
Are you those completely outdated boiler systems from Ningxia Coal? Carbon scrubber towers now mostly use shift condensate along with high-pressure gray water
With Texaco as well as water-cooled pulverized coal, there are cases of blockages at the bottom of the scrubber towers. Is this water seal a tank or just a buffer vessel used to settle the sludge at the bottom?
This is good; water seals are used in the flue gases from coking or catalytic cracking