Self-generated steam issue
Thread Content
The steam produced now is around 3 tons; how should it be adjusted to reduce it to 2 tons? So, to produce less steam, what adjustments need to be made?
Within the limits permitted by the temperature of the cooling medium, increase the pressure appropriately; if that doesn’t work, then reduce the feedwater temperature. However, the latter is difficult to achieve, as it’s not up to you as a single user
In heat balance, the heat flow can only reduce the temperature at the inlet, or increase the temperature of the heat flow at the generator outlet.
Pay attention to routing the heat source around; there are no changes in steam pressure or temperature, only a change in volume
Reduce the heat flow into the temperature regulator, or increase the temperature of the heat flow at the generator outlet.