The water cut off by the water cutter of the spherical tank
Thread Content
Where is it appropriate to direct the water cut off by the ball tank’s water cutter? Are there any regulatory requirements regarding this?
All the water we cut off is discharged into the wastewater treatment system. (
Generally, it goes to the wastewater treatment system
I just want to know if there are any regulatory requirements
It is recommended to check the design specifications and look at the design drawings; the specific basis has not been found yet...
There are no standard requirements for this; the proper approach is to first send it to an open sewage tank where it can evaporate, allowing the light components to evaporate naturally before sending it to a wastewater treatment facility for further processing.
Of course not; it must go to the sewage tank, into the sewage treatment system.
We need to go to the rainwater gutter first, and then proceed to the oil-water separation unit in the oily wastewater pipeline system