Do the condensate pipes and heat tracing pipes need to remove the condensate?
Thread Content
Do the condensate pipes and heat tracing pipes need to remove the condensate? As asked in the question
It depends on the layout of your heat tracing tubes, as well as the location of the condensate you mentioned and what the heat tracing medium is. Since there is condensate, steam tracing should be used; there must be a drain valve for the condensate
Do I need to drain the water from the pipe in summer?
I mean, during the summer when it’s not in use, the description is incorrect
The condensate is equipped with a drain valve, and it must be drained; otherwise, it will affect the heat tracing effect.
If there is condensate, it must be removed by using a steam trap.
It was shut down in summer; there’s no need to discharge it
We arrange them as much as possible; if it’s difficult to arrange the heat tracing tubes, we use nitrogen to blow them out. In short, water must not be stored in the pipes during their downtime.
Not only should it be arranged in order, but it also needs to be dried to prevent severe rusting
If possible, it’s better to dry it with air; all the steam supply points need to be opened... it’s a huge amount of work
The last edit to this post was made by wwwoaioo on 2017-5-1 at 07:48. Condensate is generally recovered, as it contains a significant amount of energy; this is clear at the site. There are dedicated condensate collection stations for heat tracing, which send the condensate back to lower-grade collection tanks