Is there such a flexible hose?
Thread Content
A flexible hose is installed on the central island; is there a type of hose that can be used for two vehicles on both sides at the same time? Is there a picture to show it? Thank you
This post was last edited by FLYTOINTER on 2018-3-24 at 19:53. No, because it’s not possible to adjust the position; making both pipes in the same way can cause interference, so it’s better to have two separate flexible hoses on the central island
With two flexibles per section, it’s easy to have a competition for flow rate; if the designed flow rate is too high, it becomes very dangerous, and any issues that arise are difficult to control
One-fifth two-hose connections can easily compete for volume. If the design flow rate is sufficient, it becomes difficult to control problems, which poses a hidden risk.
In such cases, dip pipes are usually installed on both sides, allowing the subsequent systems to share them; in fact, the investment increase is not significant
There is no problem with producing this type of flexible hose; the issue is that it is not convenient to use. The requirements for parking vehicles on both sides are quite precise, but there is still no separate unit that makes operation easier. But it doesn’t have to be done simultaneously; by expanding the envelope range, one machine can also suffice
You won’t save that much money by cutting costs; if you can start a business anyway, why bother saving on such a small amount?
This method can be used for loading large quantities of the same product; several flexible hoses can be connected to a single main pipe, and pumps with variable frequency control are used to regulate pressure and flow, or PCs are employed to control backflow in order to maintain the desired flow and pressure in the main pipe. The batch controller uses centralized control.
This post was last edited by sdwfsgyykai on 2018-6-10 08:06. Yes, it exists! It is sufficient to weld two sleeve wall systems on each side of the column; Lianyungang Aide Petrochemical has already manufactured such dip pipes!