Bubbling tower problem
Thread Content
There is a spray tower at the factory site; it is a tray tower equipped with 5 layers of bubble trays, with a diameter of 2 meters. The air flow rate is 20 m3/h, and the amount of liquid used for spraying is 1500 kg/h. Through observation through the sight glass, it was noticed that during the bubbling process, in some of the bubble trays, liquid would suddenly spray upward, and the location of these bubbles was random. What could be the reason for this? Uneven gas distribution? Uneven liquid distribution? Is there a problem with the blister pack?
Is it confirmed to be 20 m3/h? It’s too small
It is likely due to uneven liquid distribution; the uneven distribution of liquid on the tray plates is the cause. If time permits, open it and check.