HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

When the feedstock becomes lighter, the bottom temperature of our distillation tower decreases, while the top temperature increases. But why does the acidic gas at the top of the reflux tank at the tower top decrease? And as the raw material becomes heavier, the bottom temperature increases while the top temperature decreases; as a result, the amount of acidic water at the top of the reflux tank increases. I would like to ask the experts: why is it acidic?

2019-08-27View Original

Thread Content

When the feedstock becomes lighter, the bottom temperature of our distillation tower decreases, while the top temperature increases. But why does the acidic gas at the top of the reflux tank at the tower top decrease? As the raw material becomes heavier, the bottom temperature increases while the top temperature decreases; as a result, the amount of acidic water at the top of the reflux tank increases. I would like to ask the experts why the amount of acidic water increases when the composition becomes heavier and decreases when it becomes lighter. Thank you!
Reply #22019-08-28
It’s a bit illogical! The temperature at the bottom of the tower has already decreased; can the temperature at the top of the tower still increase? If the feed temperature remains stable, where does the thermal energy at the top of the tower come from?
Reply #32019-08-28
From the bottom of the tower. The heat amount remains the same; with a low bottom temperature, it’s certain that all the heat goes to the upper part
Reply #42019-09-04
Has there been a change in the vapor stripping volume at the bottom of the tower? If it increases, the acidity of the water also increases. Also, monitor the changes in the moisture content of the feed.
Reply #52019-09-04
The amount of acidic water should be independent of the severity
Reply #62019-11-26
When the raw material is light, there are more light components, and thus more heat is carried upward. But is the change in the acidic water related to your other operations? It’s not quite clear
Reply #72020-01-22
Is it because the top temperature is high, causing the temperatures of various components in the reflux stream to be high as well? As a result, some of the moisture escapes through the gas phase. Let’s check whether there has been any change in the total amount of acidic water at the upstream and downstream stations

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.