What type of sprayer should be used for a tower with a diameter of 2400?
Thread Content
For the design, I used Aspen to simulate a tower; the diameter of this tower is 2400 mm after rounding. What type of nozzle should be used for a tower of such large size? The largest nozzles I found in the literature have a diameter of only 1200 mm, and they are of the overflow disk type. Solve. . .
Top of tower return tray preferred, anti-clogging nozzle or tray. For collecting and distributing liquid to the side stream, choosing the right tray is crucial. It is difficult to control when the liquid level is too low; use an external flow tray in place of the regular tray. No side streams for liquid collection and distribution; choose between trough trays or sieve trays. In the case of a circulating heat extraction section, there are nozzle plates and groove tubes. A side stream is provided at the top of the heat extraction section; both trough and tray types are recommended. The bulk filler fluid is difficult to disperse, while the fluid from the optimized discharge nozzle forms a layer. A circulation system is provided below the small collector, using annular groove nozzles or groove plates. Above the packing are the tray plates; tray-and-tube trays are preferred. An overflow disc is below the filler, with a disc mounted on the beam for support. The redesigned version saves space, with the new connection channel taking the crown. The variable-aperture tube has defects, while the constant-aperture tube has a varying cross-section. It’s difficult to arrange liquid flow in tower wave dissipators; nozzles are superior to anti-erosion disks. Impact foaming can be avoided; a liquid seal tube should be used for the tray grooves. With mixed liquid distribution, both phases are complete; it’s only natural that the disk type is superior while the trough type is inferior. The overflow disk passes beneath the flow plate, connecting to the groove disk and the groove tube. Applying the liquid through the flow is quite simple; choose the nozzle wisely and without delay. Dual-tube liquid distribution four-flow disc, fixed-ratio liquid separation weir with long strut. Gas-liquid co-passing reaction is complete; no liquid guide tubes are provided in the tray. Flash feeding is highly challenging, and tubular and trough types present difficulties. Porous ring box with groove trays – all types of feed materials can be accommodated.
For the secondary trough type, we’ve used it before and there have been no issues.
A slotted disc-type liquid distributor would be good.
Using this trough-type liquid distributor is a good option