Installation location of pump outlet pressure gauge
Thread Content
The outlet of the 8-way jet grouting pump in the company currently needs a pressure gauge to monitor the pump’s operation; where should this pressure gauge be installed at the outlet? What’s the specific distance? It would be best to specify which standard is being used
Between the outlet and the valve (check valve)
Between the pump outlet and the valve, it is possible to accurately measure the pressure of the pump, as well as the pressure buildup generated by the pump in the event of a valve failure.
It can be between the pump outlet and the valve.
Installed on the pump outlet pipeline, in front of the check valve. [
May I ask if there are any design specification guidelines?
Installed on the pump outlet pipeline, in front of the check valve; P:L
It is common to install a pressure gauge in front of the outlet check valve. The original poster can take a look at the PID diagram of your system’s process.
I vaguely remember that according to the testing standards, the distance from the exit should be more than 4 times the diameter.