Utility Conditions from Selection Data Sheet
Thread Content
There is a public engineering condition in the pump selection data standard. What is this based on and how to fill it in?
This is a public engineering condition provided by the customer or design institute. It has nothing to do with the pump manufacturing company. It is just that the manufacturing company will give a list of public engineering consumption, such as cooling water flow, etc.
As the moderator above said, these are generally just the public engineering conditions provided by the owner to the manufacturer.
Are these provided by craftsmanship or electrical?
What does it have to do with electrical? ? ? :o Just look for craftsmanship.
The basic design data should have been filled in when entrusting the process.
Fill in the information based on the basic data provided by the owner
Is this something that must be included in the selection data sheet?
This utility condition is for pump manufacturing companies to see, such as voltage, 380 or 660 or 10000V. Pump companies should choose motors based on this and get a good quote. If there is a need for cooling water, such as the plan21 flushing solution, if there is no cooling water condition, the pump company will confirm these things with the user or design institute.