The Metrix transmitter keeps breaking down
Thread Content
The Metrix transmitter on the high-pressure water pump keeps breaking down; even those that have just been replaced fail to function before long. What’s the solution? A voltage of 24V is normal
If damage keeps occurring during the installation phase, it is necessary to consider whether it is due to environmental factors or an inappropriate choice of equipment； If it is a subsequent maintenance task and no change has been made to the equipment model, it is necessary to check whether the devices that have failed consecutively belong to the same batch; if they do belong to the same batch, consider the possibility that fake or counterfeited products were purchased ； If they are not from the same batch, it is recommended to recheck whether there was an error in the installation method.
There are no operating condition parameters at all, making it difficult to make a judgment. As you said, it broke before even being used. The issue with operating conditions can be ruled out. Then it occurs before or during installation. Sensors and transmitters both use microelectronic components, which can easily be damaged due to vibration or static electricity, especially in products of unreliable quality. Additionally, during installation, damage may occur due to carelessness.
There are no operating condition parameters at all, making it difficult to make a judgment. As you said, it broke before even being used. The issue with operating conditions can be ruled out. Then it occurs before or during installation. Sensors and transmitters both use microelectronic components, which can easily be damaged due to vibration or static electricity, especially in products of unreliable quality. Additionally, during installation, damage may occur due to carelessness.
Identify the cause by analyzing the phenomena; if all parameters are normal, then it is a quality issue
Factors such as whether the range selection is appropriate, whether the installation method is reasonable, and whether the power supply is stable all need to be carefully checked. Additionally, it is also very important to ensure that the transmitter is of reliable quality.