Help translate what it means – it appears in the calculation process
Thread Content
SEVERE ERROR WHILE GENERATING PROP-TABLE: “PT-1” FLASH CALCULATIONS FAILED TO CONVERGE IN 12 ITERATIONS. BUBBLE POINT CALCULATION HAS DRIVEN THE TEMPERATURE DOWN TO THE LOWER LIMIT OF 82.9318 DEGREE K. BUBBLE POINT TEMPERATURE MAY NOT BE ESTIMATED AT THE SPECIFIED PRESSURE. BUBBLE POINT TEMPERATURE COULD NOT BE CALCULATED DUE TO FLASH CALCULATION FAILURE
Service error occurred while generating the Prop-Table. Start with the beginning, and I’ll translate the rest. You keep using that calculation software, so you should be familiar with its functions and features.
When performing bubble point calculations, no solution was found even by searching all the way down to the minimum temperature; it is possible that there is no bubble point at the specified pressure. Vaporization failed.